This unique hot-melt glue is designed for points, inserts & bushings. Its flexible properties keep it from cracking even after repeated impacts from shooting the arrow into the target. Components installed with the CoolFlex glue can be easily adjusted or removed - simply dip the glued part in hot water and hold for a few seconds. Recommended for carbon, aluminum and fiberglass shafts.
Perfect for fixing arrows and still able to moving it when needed.
Used this for the first time this 3D and hunting season. Works great! used in extremly hot weather and cold. Never let me down. No messing with nasty glues and easy to clock Broad Heads.
Definitely recommend.
Newbie installing points for first time. Initially didn't put enough (light thin hue of blue all over point shaft) and lost 5 points out on my first day shooting into just foam targets. Redid all my remaining arrows using a generous amount (clear dark blue all around the bottom half of the point shaft and slowly twisting the point as I installed onto arrow shaft while point was still hot. No flame needed, used a mini hot gun to heat the point held with pliers. Very easy to work with
Picked this up to build my new Easton axis arrows with ethic archery inserts/outsert. Always a bit hesitant to try new materials, however this hot melt worked like a treat and resulted in zero pullouts. Shooting 550grain arrows with 76lbs on the bow, they drive deep into the target and the inserts stay in. Highly recommend
Special orders receive top priority and are given prompt attention. While larger items like bows may not always be readily available, many special order items are consistently kept in stock. The general turnaround time for special orders is a minimum of 8 weeks, depending on the lead times set by the manufacturer.
Certain bows, such as custom target bows and high-quality traditional recurve bows, are exclusively made to order directly from the manufacturer.
In some instances, left-handed products like premium target equipment may experience unforeseen delays due to batch production by the manufacturer.
We strive to meet the deadlines mentioned above and make every effort to do so. However, there may be circumstances beyond our control that prevent us from meeting those deadlines. If such a situation arises, we will make every effort to rectify the issue. Special orders can be canceled or exchanged and are eligible for a refund after 8 weeks.
Perfect for fixing arrows and still able to moving it when needed.
Used this for the first time this 3D and hunting season. Works great! used in extremly hot weather and cold. Never let me down. No messing with nasty glues and easy to clock Broad Heads.
Definitely recommend.
Newbie installing points for first time. Initially didn't put enough (light thin hue of blue all over point shaft) and lost 5 points out on my first day shooting into just foam targets. Redid all my remaining arrows using a generous amount (clear dark blue all around the bottom half of the point shaft and slowly twisting the point as I installed onto arrow shaft while point was still hot. No flame needed, used a mini hot gun to heat the point held with pliers. Very easy to work with
Picked this up to build my new Easton axis arrows with ethic archery inserts/outsert. Always a bit hesitant to try new materials, however this hot melt worked like a treat and resulted in zero pullouts. Shooting 550grain arrows with 76lbs on the bow, they drive deep into the target and the inserts stay in. Highly recommend
This unique hot-melt glue is designed for points, inserts & bushings. Its flexible properties keep it from cracking even after repeated impacts from shooting the arrow into the target. Components installed with the CoolFlex glue can be easily adjusted or removed - simply dip the glued part in hot water and hold for a few seconds. Recommended for carbon, aluminum and fiberglass shafts.
Perfect for fixing arrows and still able to moving it when needed.
Used this for the first time this 3D and hunting season. Works great! used in extremly hot weather and cold. Never let me down. No messing with nasty glues and easy to clock Broad Heads.
Definitely recommend.
Newbie installing points for first time. Initially didn't put enough (light thin hue of blue all over point shaft) and lost 5 points out on my first day shooting into just foam targets. Redid all my remaining arrows using a generous amount (clear dark blue all around the bottom half of the point shaft and slowly twisting the point as I installed onto arrow shaft while point was still hot. No flame needed, used a mini hot gun to heat the point held with pliers. Very easy to work with
Picked this up to build my new Easton axis arrows with ethic archery inserts/outsert. Always a bit hesitant to try new materials, however this hot melt worked like a treat and resulted in zero pullouts. Shooting 550grain arrows with 76lbs on the bow, they drive deep into the target and the inserts stay in. Highly recommend
Special orders receive top priority and are given prompt attention.
While larger items like bows may not always be readily available, many special order items are consistently kept in stock.
The general turnaround time for special orders is a minimum of 8 weeks, depending on the lead times set by the manufacturer.
Certain bows, such as compound bows, olympic recurve risers and limbs as well as traditional recurve bows, are exclusively made to order directly from the manufacturer if "special order" is indicated. They cannot be cancelled or refunded if special ordering.
We strive to meet the deadlines mentioned above and make every effort to do so. Due to extreme lack of availability and stock within the Archery industry, lead times are only estimates.
Cancelling special order items depends on the product type. For those that can be cancelled, the following fee's may apply.
Some products such as custom made, made-to-order or special order bows cannot be cancelled. Many of these items are brought in from overseas or made specially by the manufacturer upon an order being placed.