Skip to content

Cartel Infitec Extender Nexus Edge 3

by Cartel
$29.99
SKU CAO4270HQ
Availability: translation missing: en.general.icons.icon_check_circle icon Only 3 left!

Notify me when back in stock

The Infitec Nexus stabilizer system is designed to provide reliable performance and improve accuracy without a hefty price. The Stabilizer rods are made from 100% high-modulus carbon and have a built-in dampening system.

  • Available lengths: 4" and 5"
  • Diameter: 0.77"
  • Thread size: 5/16"

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
L
Len P. (Ontario)
Good value, but problem tightening

I bought this inexpensive carbon fiber extender, because I was unsure if I wanted to use one ongoing. It does its job, but is impossible to tighten. The side hole (used for tool to tighten) is blocked by the threaded stud that stickes out the bottom. ie, the stud is too long, inside the base. Couldn't drill it out, as the base is soft aluminum and the stud only blocks 1/2 the hole... risking drill float and damage... had a machine shop plunge an endmill to clear the hole. My recommendation... borrow one to try out, or pay more and buy a higher end extender.

M
Mike S. (British Columbia)
Simple, attractive and a value

My extender did what I wanted. to push the weight a bit more forward without also adding a lot of weight at the riser.
I'm happy with my choice

All special orders are treated with priority. Outside of larger items such as bows, many special order items are on a consistent stocking basis. General turn around due to pandemic backorders is at least 8 weeks depending on manufacturer lead times.

Some bows such as custom target bows and top shelf traditional recurve bows are on a made to order basis directly from the manufacturer.

Some left handed products such as high end target equipment can also experience unforseen delays due to manufacturer batch production.

We make every effort to meet the deadlines set above. Sometimes due to issues out of our control we are unable to accomplish this. We will make every effort to remedy the situation if that is the case.

Customer Reviews

Based on 2 reviews
50%
(1)
0%
(0)
50%
(1)
0%
(0)
0%
(0)
L
Len P. (Ontario)
Good value, but problem tightening

I bought this inexpensive carbon fiber extender, because I was unsure if I wanted to use one ongoing. It does its job, but is impossible to tighten. The side hole (used for tool to tighten) is blocked by the threaded stud that stickes out the bottom. ie, the stud is too long, inside the base. Couldn't drill it out, as the base is soft aluminum and the stud only blocks 1/2 the hole... risking drill float and damage... had a machine shop plunge an endmill to clear the hole. My recommendation... borrow one to try out, or pay more and buy a higher end extender.

M
Mike S. (British Columbia)
Simple, attractive and a value

My extender did what I wanted. to push the weight a bit more forward without also adding a lot of weight at the riser.
I'm happy with my choice